Holosun Replacement Screws

These are the screws you need to mount the Holosun 407K or 507K to your Smith & Wesson Equalizer, Smith & Wesson M&P 5.7, or Smith & Wesson M&P 22 Magnum. Smith and Wesson uses a 6/32 thread pitch, and the 407K/507K optics do not come with screws with that thread pitch. Purch...

*Please Read* Our short M4 screws are backordered we only have the Longer M4 Screws in stock now. We have two screw packs: For 407K/507K/EPS Carry with Plate: 4x High Strength M4 (long) Screws with blue Loctite already applied  For EPS/EPS Carry without Plate: 4x High Strength M4 (short) Screw...

Use these screws to mount the Holosun EPS Carry on your Sig P365 or P322 without using the included EPS Carry shim plate. This will allow your optic to sit lower on your slide. When you install the Holosun EPS Carry on your Sig P365 or P322 you fill find that the included screws are a hair too sh...

New for 2024 - We Listen to our customers! Screws now include blue loctite on them Screws are T10 Torx head - same as the Holosun tool Screws sit perfectly flush when installed This is a set of replacement screws for the following Holosun Optics: Holosun 407C X2 Red and Green Holosun 507C X2 ...

This is a replacement screw set for any Holosun pistol optic battery tray screw except for the EPS and EPS Carry. These screws are VERY small and easy to lose. This pack comes with 4 of them. They are a Philips head that can be used with a common pointy head Philips screwdriver. Fits: 407K/507K ...

This is a replacement screw set for the Holosun EPS and EPS Carry. These screws are VERY small and easy to lose. This pack comes with 4 of them. They are a Philips head that can be used with a common pointy head Philips screwdriver. Fits: Holosun EPS Carry Holosun EPS Full Size  Set includes 4...

This is a set of replacement screws for the Holosun 509T RMR Plate Only! This does not replace the clamping screw on your 509T it only replaces the screws used to mount the RMR plate to your slide. If you lost or damaged the screws to mount your 509T RMR plate, this pack will replace them. It com...

Vibra-Tite Blue Thread Locker is made in the USA and is a medium-duty threadlocker that is ideal for use on Holosun replacement screws. It provides excellent vibration resistance to keep your optic in place even in the most demanding conditions. Vibra-Tite Blue Thread Locker is primerless, so you...

Wheeler, Fat Wrench Tool, Adjustable Torque, Settings from 5-60lbs, 10 Bit Set, Black/Yellow S2 tool steel bits hardened to 56-56 Rockwell Torque adjustment range from 10 inch/pounds to 65 inch/pounds Accuracy plus/minus 2 inch/pounds up to 40 inch/pounds 40-65 is +/- 5% Wheeler's FAT Wrenc...

Wheeler, Digital FAT Wrench, Torque Wrench Large LCD Display Full Set of Bits Included Ergonomic Over Molded Design Wheeler's Digital F.A.T. Wrench brings even more precise torque settings to the handheld torque wrench market. This amazing digital handheld torque wrench lets you apply repeata...

Wheeler, Space Saver Gunsmith Screwdriver Set, Tool, With 26 Bits Includes standard Phillips, Hex and Torx bits Hex to square conversion bit Magnetic handle Less than half the size of comparable gunsmithing screwdriver sets, the Wheeler(R) Space Saver Gunsmithing Screwdriver Set takes up very...

Bundle & Save! Take advantage of this awesome budget friendly range day safety combo. Don't let the shooting range price gouge your for safety glasses and hearing protection, just buy these! In this pack you get two Radians Mirage Safety glasses and two Walker Ear Plugs. The glasses are one o...

Bundle & Save! Take advantage of this awesome budget friendly range day safety combo. Don't let the shooting range price gouge your for safety glasses and hearing protection, just buy these! In this pack you get one Radians Mirage Safety glasses and one Walker Ear Plugs. The glasses are one o...